Guidance

Storing and treating flex fittings from waste carbon motor brushes impregnated with silver: LRWP 37

Published 20 August 2019

Applies to England

© Crown copyright 2019

This publication is licensed under the terms of the Open Government Licence v3.0 except where otherwise stated. To view this licence, visit nationalarchives.gov.uk/doc/open-government-licence/version/3 or write to the Information Policy Team, The National Archives, Kew, London TW9 4DU, or email: psi@nationalarchives.gov.uk.

Where we have identified any third party copyright information you will need to obtain permission from the copyright holders concerned.

This publication is available at https://www.gov.uk/government/publications/low-risk-waste-positions-industrial-waste/storing-and-treating-flex-fittings-from-waste-carbon-motor-brushes-impregnated-with-silver-lrwp-37

This low risk waste position (LRWP) applies to storing and treating flex fittings from waste carbon motor brushes impregnated with silver (European Waste Catalogue Code 16 02 14).

If you follow the conditions in this LRWP you can carry out the activity without an environmental permit for a waste operation.

Conditions you must comply with

You must:

  • store the flex fittings in a secure place
  • only treat flex fittings by cutting
  • store no more than 1 tonne of flex fittings at any one time
  • only store up to 3 tonnes of flex fittings over a 12 month period

You must make sure your activities do not endanger human health or the environment. You must not:

  • cause a risk to water, air, soil, plants or animals
  • cause a nuisance through noise or odours
  • adversely affect the countryside or places of special interest

Enforcement

A LRWP means that the Environment Agency will not normally take enforcement action against you provided:

  • your activity meets the description set out in this LRWP
  • you comply with the conditions set out in this LRWP
  • your activity does not, and is not likely to, cause environmental pollution or harm human health

Contact the Environment Agency

General enquiries

National Customer Contact Centre
PO Box 544
Rotherham
S60 1BY

Email enquiries@environment-agency.gov.uk

Telephone 03708 506 506

Telephone from outside the UK (Monday to Friday, 8am to 6pm GMT) +44 (0) 114 282 5312

Monday to Friday, 8am to 6pm.

Back to top