Quality control of fungal and viral biocontrol agents - Assurance of product performance.
Abstract
An essential feature of the production of all microbial control agents is an effective quality control system. Well-defined product specifications with accompanying quality control procedures help to maximize product performance, ensure product safety, standardize manufacturing costs and reduce the risks of supply failure, thus building user confidence. A production system that does not have a quality control system is one whose output is uncontrolled and a lack of thorough quality feedback can result in batches of product with variable concentrations of active agent. This results in products with variable performance leading to control failures by users and serious loss of user confidence. Strict quality control procedures are not only essential for product consistency, but also for safety. Where quality control is inadequate, microbial contamination of the final product is inevitable. In most of such cases this will merely lead to a loss of efficacy due to dilution of the active ingredient by competing microorganisms, but also the potential of producing human pathogens must be ruled out. Recognition of contaminants and quantification of the degree of contamination are therefore important in determining any possible risk to human health. Many low technology production systems in use around the world have minimal or no quality control procedures. This is unacceptable and can damage the reputation of microbial control in addition to possibly posing health risks to those that produce or are exposed to the product. Two case studies from developing countries, are used to illustrate how the lack of quality control procedures can lead to the production of low viability, highly contaminated products with low or negligible concentrations of the active ingredient. However, it is also demonstrated that low technology production systems in developing countries can produce high quality products, provided appropriate quality control procedures are firmly implemented. It must be recognized that quality control procedures can be more complex and technologically demanding than the production procedures themselves, but it is largely on the effectiveness of these control procedures that the long-term acceptability of fungal and viral products depends. This paper details the quality control procedures considered necessary in the mass production of fungi and viruses for use as biocontrol agents, and attempts to suggest reasonable standards that can be achieved by all producers.
Citation
Biocontrol Science and Technology (2000) 10 (6) 753-777 [DOI: 10.1080/09583150020011717]
Links
Quality control of fungal and viral biocontrol agents - Assurance of product performance.