Importing into the UK
Select a country to view country-specific import information.
You can check if preferential tariff treatments apply to the import of this specific product in the Origin tab.
Import controls
Country | Measure type | Conditions | Legal base | Footnotes |
---|---|---|---|---|
Russia (RU) | Restriction on entry into free circulation | S.I. 2019/855 | ||
Ukraine (UA) | Restriction on entry into free circulation | S.I. 2022/395 |
Import duties
The table below lists the import duties that apply to the import of commodity 8212200000.
Use our tariff duty calculator to work out the duties and taxes applicable to the import of commodity 8212 2000 00
Click on a measure type to find out more about the measure and the preference code to be used on declarations.
Quota order number
This quota is not available on the selected date.
Trade remedies, safeguards and retaliatory duties
Country | Measure type | Duty rate | Conditions | Legal base | Footnotes |
---|---|---|---|---|---|
Belarus (BY) | Additional duties | 35.00% | 2022 No. 598 | ||
Russia (RU) | Additional duties | 35.00% | 2022 No. 598 |
Import VAT and excise
- Excise duties are not chargeable on this commodity.
Country | Measure type | Duty rate | Conditions | Legal base | Footnotes |
---|---|---|---|---|---|
Areas subject to VAT or Excise (1400) | Value added tax Standard rate | 20.00% |
|
Exporting from the UK
The commodity code for exporting and Intrastat reporting is 8212 2000.
UK export controls
Country | Measure type | Duty rate | Conditions | Legal base | Footnotes |
---|---|---|---|---|---|
All countries (1011) | Supplementary unit | 1,000 items (p/st) |
|
R2658/87 | |
North Korea (KP) | Export control on restricted goods and technologies | S.I. 2019/411 |
Check duties and customs procedures for exporting goods
Find information about how to move goods from the UK to the rest of the world.
Use this service to check:
- rules and restrictions
- tax and duty rates
- what exporting documents you need
This service is only available in the UK due to licencing restrictions;
Origin allows for various policy measures to be implemented and for duties to be calculated.
There are two types of origin, subject to different rules, which may affect your trade.
Preferential rules of origin
Products which meet all preferential rules of origin (for countries where the UK has trade agreements in place) may be eligible for reduced or zero duty rates.
Non-preferential rules of origin
Products with non-preferential rules of origin may incur commercial policy measures, such as:
- anti-dumping duties
- countervailing duties
- trade embargoes
- safeguarding measures
- quantitative restrictions
- tariff quotas
View rules for determining non-preferential origin (opens in new tab)
Notes for commodity 8212200000
Chapter notes
-
Apart from blow lamps, portable forges, grinding wheels with frameworks, manicure and pedicure sets, and goods of heading 8209, this Chapter covers only articles with a blade, working edge, working surface or other working part of:
a. base metal;
b. metal carbides or cermets;
c. precious or semi-precious stones (natural, synthetic or reconstructed) on a support of base metal, metal carbide or cermet; or
d. abrasive materials on a support of base metal, provided that the articles have cutting teeth, flutes, grooves, or the like, of base metal, which retain their identity and function after the application of the abrasive.
-
Parts of base metal of the articles of this chapter are to be classified with the articles of which they are parts, except parts separately specified as such and tool-holders for hand tools (heading 8466). However, parts of general use as defined in note 2 to Section XV are in all cases excluded from this chapter.
Heads, blades and cutting plates for electric shavers or electric hair clippers are to be classified in heading 8510.
-
Sets consisting of one or more knives of heading 8211 and at least an equal number of articles of heading 8215 are to be classified in heading 8215.
Section notes
-
This section does not cover:
a. prepared paints, inks or other products with a basis of metallic flakes or powder (heading 3207 to 3210, 3212, 3213 or 3215);
b. ferro-cerium or other pyrophoric alloys (heading 3606);
c. headgear or parts thereof of heading 6506 or 6507;
d. umbrella frames or other articles of heading 6603;
e. goods of Chapter 71 (for example, precious-metal alloys, base metal clad with precious metal, imitation jewellery);
f. articles of Section XVI (machinery, mechanical appliances and electrical goods);
g. assembled railway or tramway track (heading 8608) or other articles of Section XVII (vehicles, ships and boats, aircraft);
h. instruments or apparatus of Section XVIII, including clock or watch springs;
ij. lead shot prepared for ammunition (heading 9306) or other articles of Section XIX (arms and ammunition);
k. articles of Chapter 94 (for example, furniture, mattress supports, luminaires and lighting fittings, illuminated signs, prefabricated buildings);
l. articles of Chapter 95 (for example, toys, games, sports requisites);
m. hand sieves, buttons, pens, pencil-holders, pen nibs, monopods, bipods, tripods and similar articles or other articles of Chapter 96 (miscellaneous manufactured articles); or
n. articles of Chapter 97 (for example, works of art).
-
Throughout the classification, the expression ‘parts of general use’ means:
a. articles of heading 7307, 7312, 7315, 7317 or 7318 and similar articles of other base metal, other than articles specially designed for use exclusively in implants in medical, surgical, dental or veterinary sciences (heading 9021)
b. springs and leaves for springs, of base metal, other than clock or watch springs (heading 9114); and
c. articles of heading 8301, 8302, 8308, 8310 and frames and mirrors, of base metal, of heading 8306.
In Chapters 73 to 76 and 78 to 82 (but not in heading 7315), references to parts of goods do not include references to parts of general use as defined above.
Subject to the preceding paragraph and to note 1 to Chapter 83, the articles of Chapter 82 or 83 are excluded from Chapters 72 to 76 and 78 to 81.
-
Throughout the classification, the expression ‘base metals’ means: iron and steel, copper, nickel, aluminium, lead, zinc, tin, tungsten (wolfram), molybdenum, tantalum, magnesium, cobalt, bismuth, cadmium, titanium, zirconium, antimony, manganese, beryllium, chromium, germanium, vanadium, gallium, hafnium, indium, niobium (columbium), rhenium and thallium.
-
Throughout the classification, the term ‘cermets’ means products containing a microscopic heterogeneous combination of a metallic component and a ceramic component. The term ‘cermets’ includes sintered metal carbides (metal carbides sintered with a metal).
-
Classification of alloys (other than ferro-alloys and master alloys as defined in Chapters 72 and 74):
a. An alloy of base metals is to be classified as an alloy of the metal which predominates by weight over each of the other metals.
b. An alloy composed of base metals of this section and of elements not falling within this section is to be treated as an alloy of base metals of this section if the total weight of such metals equals or exceeds the total weight of the other elements present.
c. In this section, the term ‘alloys’ includes sintered mixtures of metal powders, heterogeneous intimate mixtures obtained by melting (other than cermets) and intermetallic compounds.
-
Unless the context otherwise requires, any reference in the classification to a base metal includes a reference to alloys which, by virtue of note 5 above, are to be classified as alloys of that metal.
-
Classification of composite articles:
Except where the headings otherwise require, articles of base metal (including articles of mixed materials treated as articles of base metal under the General Interpretative rules) containing two or more base metals are to be treated as articles of the base metal predominating by weight over each of the other metals.
For this purpose:
a. Iron and steel, or different kinds of iron or steel, are regarded as one and the same metal.
b. An alloy is regarded as being entirely composed of that metal as an alloy of which, by virtue of note 5, it is classified.
c. A cermet of heading 8113 is regarded as a single base metal.
-
In this section, the following expressions have the meanings hereby assigned to them:
a. Waste and scrap
All metal waste and scrap, and metal goods definitely not usable as such because of breakage, cutting-up, wear or other reasons.
b. Powders
Products of which 90% or more by weight passes through a sieve having a mesh aperture of 1mm.
-
For the purposes of Chapters 74 to 76 and 78 to 81, the following expressions have the meanings hereby assigned to them :
(a) Bars and rods
Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
Wire-bars and billets of Chapter 74 with their ends tapered or otherwise worked simply to facilitate their entry into machines for converting them into, for example, drawing stock (wire-rod) or tubes, are however to be taken to be unwrought copper of heading 7403. This provision applies mutatis mutandis to the products of Chapter 81.
(b) Profiles
Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
(c) Wire
Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross-section exceeds one-tenth of the width.
(d) Plates, sheets, strip and foil
Flat-surfaced products (other than the unwrought products), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including “modified rectangles” of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are :
-
of rectangular (including square) shape with a thickness not exceeding one-tenth of the width;
-
of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.
Headings for plates, sheets, strip, and foil apply, inter alia, to plates, sheets, strip, and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.
(e) Tubes and pipes
Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness.
Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings
-
General Rules for the Interpretation of goods
Classification of goods in the Tariff shall be governed by the following principles:
Rule 1
The titles of sections, chapters and sub-chapters are provided for ease of reference only. For legal purposes, classification shall be determined according to the terms of the headings and any relative section or chapter notes and, provided such headings or notes do not otherwise require, according to the following provisions.
Rule 2
- Any reference in a heading to an article shall be taken to include a reference to that article incomplete or unfinished, provided that, as presented, the incomplete or unfinished article has the essential character of the complete or finished article. It shall also be taken to include a reference to that article complete or finished (or falling to be classified as complete or finished by virtue of this rule), presented unassembled or disassembled.
- Any reference in a heading to a material or substance shall be taken to include a reference to mixtures or combinations of that material or substance with other materials or substances. Any reference to goods of a given material or substance shall be taken to include a reference to goods consisting wholly or partly of such material or substance. The classification of goods consisting of more than one material or substance shall be according to the principles of rule 3.
Rule 3
When, by application of rule 2(b) or for any other reason, goods are prima facie classifiable under two or more headings, classification shall be effected as follows:
- the heading which provides the most specific description shall be preferred to headings providing a more general description. However, when two or more headings each refer to part only of the materials or substances contained in mixed or composite goods or to part only of the items in a set put up for retail sale, those headings are to be regarded as equally specific in relation to those goods, even if one of them gives a more complete or precise description of the goods;
- mixtures, composite goods consisting of different materials or made up of different components, and goods put up in sets for retail sale, which cannot be classified by reference to 3(a), shall be classified as if they consisted of the material or component which gives them their essential character, insofar as this criterion is applicable;
- when goods cannot be classified by reference to 3(a) or (b), they shall be classified under the heading which occurs last in numerical order among those which equally merit consideration.
Goods which cannot be classified in accordance with the above rules shall be classified under the heading appropriate to the goods to which they are most akin.
Rule 5
In addition to the foregoing provisions, the following rules shall apply in respect of the goods referred to therein:
- camera cases, musical instrument cases, gun cases, drawing-instrument cases, necklace cases and similar containers, specially shaped or fitted to contain a specific article or set of articles, suitable for long-term use and presented with the articles for which they are intended, shall be classified with such articles when of a kind normally sold therewith. This rule does not, however, apply to containers which give the whole its essential character;
- subject to the provisions of rule 5(a), packing materials and packing containers ( 1 ) presented with the goods therein shall be classified with the goods if they are of a kind normally used for packing such goods. However, this provision is not binding when such packing materials or packing containers are clearly suitable for repetitive use.
Rule 6
For legal purposes, the classification of goods in the subheadings of a heading shall be determined according to the terms of those subheadings and any related subheading notes and, mutatis mutandis, to the above rules, on the understanding that only subheadings at the same level are comparable. For the purposes of this rule, the relative section and chapter notes also apply, unless the context requires otherwise.
Code | Description |
---|---|
TN701 |
According to the Council Regulation (EU) No 692/2014 (OJ L183, p. 9) it shall be prohibited to import into European Union goods originating in Crimea or Sevastopol. The prohibition shall not apply in respect of: (a) the execution until 26 September 2014, of trade contracts concluded before 25 June 2014, or of ancillary contracts necessary for the execution of such contracts, provided that the natural or legal persons, entity or body seeking to perform the contract have notified, at least 10 working days in advance, the activity or transaction to the competent authority of the Member State in which they are established. (b) goods originating in Crimea or Sevastopol which have been made available to the Ukrainian authorities for examination, for which compliance with the conditions conferring entitlement to preferential origin has been verified and for which a certificate of origin has been issued in accordance with Regulation (EU) No 978/2012 and Regulation (EU) No 374/2014 or in accordance with the EU-Ukraine Association Agreement. |
Developing Countries Trading Scheme (DCTS) - Standard and Enhanced Preferences
Declaring your proof of origin
CDS Data Element (DE) | What you must include |
---|---|
DE 2/3 |
You must include one of the following document codes, as appropriate:
|
DE 4/17 |
The data element must include a preference code in the 200 series. |
Developing Countries Trading Scheme (DCTS) - Standard and Enhanced Preferences
Declaring your proof of origin
CDS Data Element (DE) | What you must include |
---|---|
DE 2/3 |
You must include one of the following document codes, as appropriate:
|
DE 4/17 |
The data element must include a preference code in the 200 series. |
Developing Countries Trading Scheme (DCTS) - Comprehensive Preferences
Declaring your proof of origin
CDS Data Element (DE) | What you must include |
---|---|
DE 2/3 |
You must include one of the following document codes, as appropriate:
|
DE 4/17 |
The data element must include a preference code in the 200 series. |
Code | Description |
---|---|
03020 | UK VAT standard rate |
Tariff preference for CPTPP All Members
From 24 Dec 2024
Meet the following condition and supply the relevant document code(s) on your declaration.
Document code | Requirement | Action |
---|---|---|
9081 |
Goods declared under the Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) |
Import allowed
|
Guidance for completing CDS Data Element 2/3
Document code | CDS guidance |
---|---|
9081 |
|
Code | Description |
---|---|
RT001 |
To claim preference under the Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP), Document Code 9081 must be declared in D.E. 2/3 in addition to the appropriate Certification of Origin Document Code detailed below:
Information on declaring these Document Codes in D.E. 2/3 can be found in the CDS guidance on GOV.UK The Minimum Data Requirements for what should be included in a Certification of Origin is set out in Annex I of the CPTPP Origin Reference Document (available on the GOV.UK link). |
Free Trade Agreement between the United Kingdom of Great Britain and Northern Ireland and Australia
Declaring your proof of origin
CDS Data Element (DE) | What you must include |
---|---|
DE 2/3 |
You must include one of the following document codes, as appropriate:
Codes U110 and U111 must be declared with one of the following document status codes (opens in new window): AE, AF, AG, AP, AS, AT, GE, GP, HP, JE, JP, LE, LP, UA, UE, UP, US, XB. |
DE 4/17 |
The data element must include a preference code in the 300 series. |
DE 5/16 |
The data element must be completed with the country of preferential origin. |
Additional duties for Belarus
From 1 Jun 2022
Meet one of the following conditions and supply the relevant document code(s) on your declaration.
Document code | Requirement | Action |
---|---|---|
9014 |
Goods of Belarusian or Russian origin exported from any country before 1st June 2022. |
Measure not applicable
|
No document provided |
Apply the mentioned duty
|
Guidance for completing CDS Data Element 2/3
Document code | CDS guidance |
---|---|
9014 |
|
Code | Description |
---|---|
SN060 | Goods of Russian or Belarusian origin that were exported out of Russia and Belarus before 1st June 2022 as per The Customs (Additional Duty) (Russia and Belarus) Amendment Regulations 2022 are exempt from these additional duties and document code 9014 should be used. You may need to provide commercial evidence to HMRC when using this Document Code. |
UK-Comprehensive and Progressive Agreement for Trans-Pacific Partnership Agreement (CPTPP)
Declaring your proof of origin
CDS Data Element (DE) | What you must include |
---|---|
DE 2/3: |
|
DE 4/17 |
The data element must include a preference code in the 300 series. |
DE 5/16 |
Enter the CPTPP Party of preferential origin. Further information on completing data elements can be found here: |
UK-Comprehensive and Progressive Agreement for Trans-Pacific Partnership Agreement (CPTPP)
Declaring your proof of origin
CDS Data Element (DE) | What you must include |
---|---|
DE 2/3: |
|
DE 4/17 |
The data element must include a preference code in the 300 series. |
DE 5/16 |
Enter the CPTPP Party of preferential origin. Further information on completing data elements can be found here: |
Free Trade Agreement between the United Kingdom of Great Britain and Northern Ireland and New Zealand
Declaring your proof of origin
CDS Data Element (DE) | What you must include |
---|---|
DE 2/3 |
You must include one of the following document codes, as appropriate:
Codes U110 and U111 must be declared with one of the following document status codes (opens in new window): AE, AF, AG, AP, AS, AT, GE, GP, HP, JE, JP, LE, LP, UA, UE, UP, US, XB. |
DE 4/17 |
The data element must include a preference code in the 300 series. |
DE 5/16 |
The data element must be completed with the country of preferential origin. |
UK-Comprehensive and Progressive Agreement for Trans-Pacific Partnership Agreement (CPTPP)
Declaring your proof of origin
CDS Data Element (DE) | What you must include |
---|---|
DE 2/3: |
|
DE 4/17 |
The data element must include a preference code in the 300 series. |
DE 5/16 |
Enter the CPTPP Party of preferential origin. Further information on completing data elements can be found here: |
UK-Comprehensive and Progressive Agreement for Trans-Pacific Partnership Agreement (CPTPP)
Declaring your proof of origin
CDS Data Element (DE) | What you must include |
---|---|
DE 2/3: |
|
DE 4/17 |
The data element must include a preference code in the 300 series. |
DE 5/16 |
Enter the CPTPP Party of preferential origin. Further information on completing data elements can be found here: |
Restriction on entry into free circulation for Russia
From 15 Dec 2023
Meet one of the following conditions and supply the relevant document code(s) on your declaration.
Document code | Requirement | Action |
---|---|---|
9011 |
Goods subject to sanction with a DBT import or export licence |
Import allowed
|
9022 |
Goods not subject to sanctions. |
Import allowed
|
9064 |
Goods exported from Russia prior to 15th December 2023 that arrive in the UK before 14th January 2024. |
Import allowed
|
Guidance for completing CDS Data Element 2/3
Document code | CDS guidance |
---|---|
9011 |
|
9022 |
|
Code | Description |
---|---|
SN133 |
Goods of Russian origin falling under this commodity code are prohibited from import into the UK. Please consult Russia sanctions guidance for a link to the sanctions legislation and he Russia (Sanctions) (EU Exit) (Amendment) (No. 4) Regulations 2023 up to date advice on the sanctions and any exemptions and conditions that may apply to your goods. A licence may be granted for the import into the UK of goods falling under this commodity code if it relates to the execution of obligations arising from contracts concluded before 15 December 2023. For goods exported from Russia prior to 15th December 2023 that arrive in the UK before 14th January 2024, please declare document code 9064. For other exceptions, please declare document code 9022. |
Additional duties for Russia
From 1 Jun 2022
Meet one of the following conditions and supply the relevant document code(s) on your declaration.
Document code | Requirement | Action |
---|---|---|
9014 |
Goods of Belarusian or Russian origin exported from any country before 1st June 2022. |
Measure not applicable
|
No document provided |
Apply the mentioned duty
|
Guidance for completing CDS Data Element 2/3
Document code | CDS guidance |
---|---|
9014 |
|
Code | Description |
---|---|
SN060 | Goods of Russian or Belarusian origin that were exported out of Russia and Belarus before 1st June 2022 as per The Customs (Additional Duty) (Russia and Belarus) Amendment Regulations 2022 are exempt from these additional duties and document code 9014 should be used. You may need to provide commercial evidence to HMRC when using this Document Code. |
UK-Comprehensive and Progressive Agreement for Trans-Pacific Partnership Agreement (CPTPP)
Declaring your proof of origin
CDS Data Element (DE) | What you must include |
---|---|
DE 2/3: |
|
DE 4/17 |
The data element must include a preference code in the 300 series. |
DE 5/16 |
Enter the CPTPP Party of preferential origin. Further information on completing data elements can be found here: |
Restriction on entry into free circulation for Ukraine
From 30 Mar 2022
Meet one of the following conditions and supply the relevant document code(s) on your declaration.
Document code | Requirement | Action |
---|---|---|
9009 |
Goods originating in non-government controlled Ukrainian territory with a certificate of origin issued by the Ukrainian authorities |
Import/export allowed after control
|
9010 |
Goods originating specifically in the non-government controlled areas of Donetsk and Luhansk oblasts if related to an obligation arising from a contract concluded before 23 February 2022: Import allowed subject to these contracts, or ancillary contracts necessary for their execution, being concluded by 24 August 2022, and the Secretary of State for the Department for Business and Trade being informed at least ten working days in advance of this exception being used. |
Import/export allowed after control
|
9017 |
Goods exported from an area of Ukraine under the control of the Ukrainian government |
Import allowed
|
Guidance for completing CDS Data Element 2/3
Document code | CDS guidance |
---|---|
9009 |
|
9010 |
|
9017 |
|
Code | Description |
---|---|
SN008 |
The import of goods originating in non-government controlled Ukrainian territory is prohibited under the Russia (Sanctions) (EU Exit) Regulations 2019 (as amended on 30 March 2022). Exceptions apply for:
Please refer to the Statutory Guidance for further information. |
UK-Comprehensive and Progressive Agreement for Trans-Pacific Partnership Agreement (CPTPP)
Declaring your proof of origin
CDS Data Element (DE) | What you must include |
---|---|
DE 2/3: |
|
DE 4/17 |
The data element must include a preference code in the 300 series. |
DE 5/16 |
Enter the CPTPP Party of preferential origin. Further information on completing data elements can be found here: |
Export control on restricted goods and technologies for North Korea
From 1 Jan 2021
Meet one of the following conditions and supply the relevant document code(s) on your declaration.
Document code | Requirement | Action |
---|---|---|
C052 |
Export authorisation for restricted goods and technologies |
Import/export allowed after control
|
Y999 |
Goods for which an export licence is not required. Please use the Goods Checker to determine whether your items are controlled and whether you need an export licence from the Export Control Joint Unit. |
Import/export allowed after control
|
Guidance for completing CDS Data Element 2/3
Document code | CDS guidance | CHIEF guidance |
---|---|---|
C052 |
|
This document code is available on CDS only. |
Y999 |
|
This document code is available on CDS only. |
Code | Description |
---|---|
EX008 | The export of arms and WMD-related items; Aviation fuels; Condensates and natural gas liquid; Curde oil; Helicopters and vessels; Industrial machinery, vehicles, iron, steel and other metals; luxury goods; Refined petroleum products; gold and precious metals or diamonds to the Democratic People's Republic of Korea is controlled (as well as related activities). Please refer to the Sanctions to determine whether your items are controlled and whether you need a licence from the Export Control Joint Unit. |